NOMENA
FAQBook a meeting

Nomena / Guides / Laser cutting cost calculation

Laser cutting cost calculation

Laser cutting cost depends mainly on the cut length, the number of holes (every hole is a new pierce), the material and thickness of the sheet and how many parts fit on the sheet. Nomena calculates it automatically from the customer's drawing or 3D file.

What makes up the cost

  • Cutting timeCut length divided by cutting speed, which depends on material, thickness and laser power.
  • PiercesEvery hole and every new contour takes extra time, especially in thick plate.
  • TraverseThe time the head spends moving between contours.
  • The sheetThe share of the sheet the part takes in the nest, plus scrap and offcuts.
  • SetupProgramming, sheet changes and the first part.
  • FinishingDeburring, grinding or breaking out micro-joints.

A simplified formula

Laser time per part = cut length ÷ cutting speed + pierces × time per pierce + traverse ; Piece price = laser time × hourly rate + sheet × share + setup ÷ quantity + markup

Why laser prices are often wrong

  • Cutting speed varies a lot between stainless, aluminium and mild steel, and between thicknesses.
  • Lots of small holes take more time than the cut length suggests.
  • Nesting decides how much sheet is used, and it is often done only after the order is placed.

How Nomena does it

From email to finished quote.

The whole flow is automated, from the moment the email comes in until the quote is ready. Nomena reads the customer's email, drawing and 3D file, calculates the price with your shop's own hourly rates and writes the draft quote by itself. You open a finished draft, change what you want and send it. The price is calculated by code, never by AI, and no quote goes out without your approval.

1The email comes inA request with drawing and 3D file
2ReadMaterial, dimensions, tolerances and holes
3CalculatedBy code, with your rates and machines
4You reviewEvery line is visible, change what you want
5The quote is sentIn your template, from your own address

Frequently asked questions

Questions and answers.

What does laser cutting cost per metre?

It depends on material, thickness and laser power. That's why Nomena uses your shop's own hourly rate and cutting speeds instead of a standard price per metre.

Does Nomena nest the parts?

Yes. Parts are laid out on the sheet, the best sheet size is chosen, and material is charged as the share of the sheet the part uses, so scrap is included in the price.

Free during the pilot

Try it on your own jobs first.

We run some of your past requests and put the drafts next to your real quotes.

Book a meeting